Акустика Sven SB-700 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
ENG
22
Soundbar with Wireless
Subwoofer
Player mode
•
The system will automatically switch to the Player mode if you install USB flash in the slot
i
or
use the
c
button on the top panel or the
i
button on the remote control. The selected mode is
displayed on the LED-display. Playback starts automatically.
Bluetooth mode
•
To transmit a signal in this mode, at first connect the device to the signal source (see Fig. 6). To
do this, select the Bluetooth mode using the
c
button on the top of the soundbar or the
i
button
on the remote control. The MSS switches to the search mode, the display a displays «BLUE».
•
It is necessary to select the search mode of devices with Bluetooth on a signal source (telephone,
notebook, smartphone, etc.). «SVEN SB-700», massage will be displayed on the screen which is to
be connected to*.
•
If the connection is successful, the «BLUE» indicator has a steady glow. If the connection fails, the
«BLUE» indicator is intermittent. It is necessary to re-translate the system into the search mode
(turn it off and on again) **.
•
During connection to the source, you can control the source player using the
e
-
g
buttons on
the remote control.
SLEEP mode
•
The «SLEEP» mode allows the product to be transferred to the «ST-BY» mode after the
user-selected time has elapsed. To switch to the «SLEEP» mode, press the
k
button on the remote
control. To exit the «SLEEP» mode, press the
k
button on the RC repeatedly until 0 appears.
Wireless connection between Soundbar and Subwoofer
•
Automate connection
.
Connect subwoofer power cable to wall power. Turn on the power switch.
LED on rear of subwoofer will flash slowly to show it is waiting for pairing. Connect soundbar power
adapter to wall power and display will turn on. Soundbar and subwoofer will pair automatically.
If pairing successfully, LED on rear of subwoofer will always light up.
•
Manual connection
.
Connect subwoofer power cable to wall power, turn on the power switch.
Press the button on rear of subwoofer. LED on rear of subwoofer will flash quickly to show
it is waiting for pairing. Connect soundbar power adapter to wall power and display will turn on,
soundbar and subwoofer will pair automatically. If pairing successfully, LED on rear of subwoofer
will always light up.
Note. Due to the constant development of the software, the actual MSS operation may
differ from that described in this manual. The most recent version of the manual is
available at www.sven.fi.
* You might have to enter “0000” code to connect some models of devices via Bluetooth.
** If the item has been already registered in the device list of a source, then the second search mode activation is not obligatory.
Choose the item name «SB-700» and the “connect” command on the source.
