Акустика Sven PS-88 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
Portable Speaker System
with Bluetooth
ENG
14
CONNECTION AND OPERATION
Attention! The built-in battery must be charged completely prior to the application.
Speaker system battery charging
•
Connect speaker system to a USB port of PC or USB charger using micro USB to USB cable
(included). During battery charging the indicator is red. Indicator goes out when the battery is
charged.
•
The battery is used in the speaker system as an integral part of the device, therefore do not try to
extract or replace it, because this can result in the warranty cancellation or the device damage.
OPERATION MODES
Bluetooth mode
•
Wireless data transfer via the Bluetooth protocol enables to connect speaker system to compatible
devises. Maximum radius of action of data transfer is 10 m. Such obstacles as walls or other electronic
devices can interfere with the signal transfer.
•
Turn on the speaker in Bluetooth mode.
•
It is necessary to select the search mode of devices with Bluetooth on a signal source (telephone,
notebook, smartphone, etc.). «SVEN PS-88» or «SVEN PS-240, massage will be displayed on the
screen which is to be connected to*.
•
When connection is successful, there will be a short beep and the indication of the search mode on
speaker system is over**.
Player mode
Attention! The file system of a micro SD carrier is FAT32. Maximum volume is 32 GB.
•
The system will enter the Player mode automatically when a carrier (SD card) is connected to
corresponding ports. Use button
b
to switch between Play / Pause modes. You can control tracks
by using buttons
a
(previous track) and
c
(next track) (long pressing).
The use in the wired mode (AUX)
•
Connect the 3.5 mm mini-jack cable to the 3.5 mm mini-jack (included) to the AUX input and the
3.5 mm jack to the signal source
•
Turn on the speaker in AUX mode – press the button
b
several times until the speaker goes into
AUX mode.
Connecting an additional speaker
For models PS-88 and PS-240, you can connect an additional speaker:
•
Turn on both speakers (long press
b
).
•
On one of the speakers, 3 times quickly press the button
b
until the sound signal appears. The
speakers will connect with each other.
Note. At the subsequent inclusion of both speakers, they will be connected automatically
* You might have to enter “0000” code to connect some models of devices via Bluetooth.
** If the item has been already registered in the device list of a source, then the second search
mode activation is not obligatory. Choose the item name «SVEN PS-88» or «SVEN PS-240» and the
“connect” command on the source.
