Акустика Sven PS-65 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
ENG
14
Portable Speaker System
with FM-radio
i
mini USB connector to the AC charger, USB port of the laptop / PC
j
Headphone jack
k
USB connector to connect USB-flash media or a USB cable (AM-AM)
CONNECTION AND OPERATION
Attention! The built-in battery must be charged completely prior to the
application.
Speaker system battery charging
•
Insert the battery (included) into the speaker. Connect speaker system to a USB
port of PC or USB charger using mini USB to USB cable (included).
OPERATION MODES
Radio mode
•
Turn on the speaker system
–
press button
a
several times until
Speaker system
does not go to radio mode. Short press of a button
b
activates auto search mode.
After scanning completion, the first scanned radio station will start to operate
automatically. With buttons
e
and
g
select a desired radio station. In the menu you
can change the function of the buttons
e
and
g
: switching radio frequency (step
0.1MHz) or save the number of stations. The menu has the ability to save / delete
a station from the memory.
МР3 player mode
Attention! The file system of a micro SD carrier is FAT32. Maximum volume is
32 GB. It is not recommended to use the micro SD Ultra Speed.
•
Turn on the speaker system in the player mode
– press the button
a
a few times
until the speaker system will go into player mode.
•
Insert the micro SD carrier into appropriate slot. If the speaker system is in turned
on position, the playback will start automatically. Playback/Pause modes are switched
over with the help of the button
f
.
Tracks can be controlled by buttons
g
(previous
track) and
e
(next track).
USB Line In mode
•
Speaker system can be used as external speaker for the PC. To do this, connect the
speaker system to your PC via a cable USB AM-AM (not included). Open the menu
with button
b
and select USB Line In mode.
To exit the radio / players / USB Line In – press and hold button
b
.
