Акустика Sven PS-50 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
ENG
19
Operation Manual
PS-50
•
Then switch on the device by long pressing of the button
d
.
•
Switch on an audio signal source.
•
Control the master volume level by long pressing of buttons
e
or
f
.
•
Connect headphones to the jack
i
(see Fig. 2).
Battery charging
•
Connect the device using USB cable (included) to DC IN port
k
, and then to a USB port of PC or
to 5V DC power unit with output USB jack.
•
If the battery is discharged, the indicator
a
blinks, but if it is charged – the indicator is red.
Notes:
• After using the MSS, mind to unplug the USB cable from a USB port of PC, notebook or 5V
DC power unit.
• To improve sound quality, use the Line-Out output of the sound card.
6. OPERATION MODES
Player Mode
•
The system will go to the player mode automatically, if one of carriers (USB
Ԝ
ash or micro SD
card)* is inserted into an appropriate jack
l
or
j
. Press the button M
c
on the front panel to
select a desired source, when the MSS is turned on. LED display
b
will show a selected source
“USB/CARD” and after that the playback time from the beginning. The playback will start auto-
matically. Press buttons
f
or
e
short on the front panel to select a track. LED will brie
Ԝ
y show the
sequence number of a track and after that the playback time from the beginning.
* The operation can be incorrect, when using a micro SD card with the capacity less than 512 Mb.
The time for command processing can be increased, when using a USB
Ԝ
ash with the capacity
more than 8 Gb.
Radio Mode
•
Use the button
ǀ
c
on the front panel to enter the radio mode when the MSS is on. The display
b
will show “FM” symbol and the frequency of a station received.
•
Press and hold down the button
ǀ
c
not less than for 2 seconds for the automatic scan and to
store the found stations. The display
b
will show a frequency during scanning and will show its
sequence number for short time during storing.
AUX Mode
•
Use the button
ǀ
c
on the front panel to enter the AUX mode, when the MSS is turned on. The
display
b
will show “AUX/LINE”.
ON/OFF Mode
•
Press and hold down the button
d
on the front panel to turn on/o
Ԛ
the MSS.
