Акустика Sven PS-470 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
15
PS-460, PS-465
PS-470
ENG
User’s Manual
TECHNICAL SPECIFICATIONS
Notes. Technical specifications given in this table are supplemental information and cannot
give occasion to claims. Technical specifications and package contents are subject to change
without notice due to the improvement of SVEN production.
Technical support is on www.sven.fi.
Parameter, measurement unit
Frequency range, Hz
Output power (RMS), W:
Speaker diameter, mm
Bluetooth supported profiles
Radius of operation, m
Battery capacity, mA*h
Power supply, V
Weight (PS-460 / PS-465, PS-470), g
Dimensions (PS-460), mm
Dimensions (PS-465 and PS-470), mm
Value
speaker: 100 – 20 000; microphone: 100 – 10 000
18 (2 × 9)
Ø 95
HSP, HFP, A2DP, AVRCP
up to 10
1800
USB/DC5V
1750 / 2050
390 × 190 × 160
400 × 190 × 154
Radio mode
•
Turn on the speaker system –
press button МODE
a
several times until the display
shows the station frequency. Long-term pressing button
g
activates auto search mode.
After scanning completion, the first scanned radio station will start to operate automatically.
With buttons
f
and
h
select a desired radio station.
Player mode
Attention! The file system of a micro SD carrier is FAT32. Maximum volume is 32
GB. It is not recommended to use the micro SD Ultra Speed.
•
The system will enter the Player mode automatically when a carrier (USB flash or SD
card) is connected to corresponding ports. Use button
g
to switch between Play / Pause
modes. You can control tracks by using buttons
f
(previous track) and
h
(next track).
Equalizer mode
•
To adjust the bass level, press the EQ button and adjust the level using the buttons
c
and
d
. To adjust the treble, press the EQ button twice.
The use in the wired mode (LINE IN)
•
Speaker system can be used as an external device for amplifying any audio source with a
3.5 mm output mini-jack. To do this, connect a cable mini USB, plug 3.5 mini-jack to the
audio input AUX.
