Акустика Sven PS-47 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
CONNECTION AND OPERATION
Attention! The built-in battery must be charged completely prior to the
application.
Speaker system battery charging
•
Connect speaker system to a USB port of PC or USB charger using
micro USB to
USB cable (included). During battery charging the indicator
is red. Indicator goes out
when the battery is charged.
•
The battery is used in the speaker system as an integral part of the device, therefore
do not try to extract or replace it, because this can result in the warranty cancellation
or the device damage.
OPERATION MODES
Bluetooth mode
•
Wireless data transfer via the Bluetooth protocol enables to connect speaker system
to compatible devises. Maximum radius of action of data transfer is 10 m. Such
obstacles as walls or other electronic devices can interfere with the signal transfer.
•
Turn on the speakers in Bluetooth mode.
•
It is necessary to select the search mode of devices with Bluetooth on a signal
source (telephone, notebook, smartphone, etc.).
«SVEN PS-47» massage will be
displayed on the screen which is to be connected to*.
•
When connection is successful, there will be a short beep and the indication of the
search mode on speaker system is over
**
.
Radio mode
To improve the reception quality of the radio signal, connect the power cable /
audio mini USB-3.5mm mini-jack / USB (included) to the input DC5V / AUX.
•
Turn on the speaker system – press button
c
several times until speaker system
does not go to radio mode. Long press of a button
e
activates auto search mode.
After scanning completion, the first scanned radio station will start to operate
automatically. With buttons
d
and
f
select a desired radio station.
*
You might have to enter “0000” code to connect some models of devices via Bluetooth.
**
If the item has been already registered in the device list of a source, then the second search
mode activation is not obligatory. Choose the item na
me
«SVEN PS-47»
an
d the “connect”
command on the source.
ENG
16
Portable Speaker System
with Bluetooth and FM-radio
