Sven PS-440 - Инструкция по эксплуатации - Страница 18

Portable Speaker System with 

Bluetooth and FM-radio

ENG

18

Radio mode

Attention! To improve the reception quality of the radio signal, connect the 3.5 mm mini-jack 

cable (included) to the AUX IN input

c

.

• 

Turn on the speaker system – press button МODE 

j

 several times until the display shows the  

station frequency. Long-term pressing button 

p

 activates auto search mode. After scanning  

completion, the ଞrst scanned radio station will start to operate automatically. With buttons 

o

 and 

q

select a desired radio station.

Player mode

Attention! The 컙le system of a micro SD carrier is FAT32. Maximum volume is 32 GB.

It is not recommended to use the micro SD Ultra Speed.

• 

The system will enter the Player mode automatically when a carrier (USB flash or SD card) is 

connected to corresponding ports. Use button 

p

 to switch between Play/Pause modes. You can 

control tracks by using buttons 

o

 (previous track) and 

q

 (next track).

The use in the wired mode (LINE IN)

• 

Speaker system can be used as an external device for amplifying any audio source with a 3.5 mm 

output mini-jack. Connect a cable mini USB, plug 3.5 mini-jack to the audio input AUX 

c

. Turn the 

speakers to the LINE IN mode – press the MODE button 

j

 several times until «LINE» appears on 

the display.

Connecting an additional speaker

For models PS-435/PS-440 you can connect an additional speaker (Bluetooth mode only):

• 

Turn both speakers into Bluetooth mode.

• 

Connect the signal source to one of the speakers via Bluetooth (the second column should be in 

search mode).

•

On another speaker press and hold button TWS.

•

 If two speakers are successfully connected between themselves, the inscription TWS will glow 

constantly.

Reset

To reset the settings, long press the EQ button until "RES" appears. Then press button   

h

 on the RC 

or button 

p

 on the front panel. Settings will reset.