Sven MS-300 - Инструкция по эксплуатации - Страница 22

USB

SD

Player

DVD

Mini-jack to 2RCA

adapter 

USB/SD-card

connection

Right

speaker

Fig. 6. Connection diagram

Left

speaker

• 

To connect the MSS to a TV or DVD player, connect the line input cable built into the subwoofer to 

the mini-jack to 2RCA adapter (not included), and then to your TV/DVD player audio outputs, as 

shown in Fig. 6.

• 

Set the BASS 

k

 volume control knob to its minimum, then plug the power cord 

o

 into the mains outlet.

• 

Switch on the subwoofer with the ON/OFF  switch (

l

, ON position) on the rear panel. Then, using 

the MODE button 

c

 on the subwoofer front panel or the MODE button 

d

 on the remote control, 

turn on the MSS and select the connected audio source with the same button.

• 

Adjust the volume level with buttons 

e

 and 

f

 on the subwoofer front panel or button 

f

 on the 

remote control.

• 

Adjust the subwoofer volume level with the corresponding knob 

k

.

• 

When listening to the radio, extend the antenna 

a

 full-length (see Fig. 4b) and adjust it for better 

reception.

• 

After using the MSS, mind to switch it o

Ԛ

 using the ON/OFF   s w i t c h  (

l

, OFF position) and un- 

plug the power cord 

o

 from the socket.

Operation modes

Player Mode

• 

To turn to the Player mode, insert a USB 

Ԝ

ash drive or an SD card containing the 

ԛ

les to be played 

into the corresponding port (

i

 or 

j

), the MSS switched on, or use the MODE button 

c

 on the 

control panel or the MODE button 

d

 on the remote control. The 

ԛ

les will automatically start 

playing. The display 

d

 on the subwoofer control panel will show the LOAD inscription for a short 

moment, then the track number and the playback time elapsed. The playing device symbol and the 

play sign       will show as well.

PC

Audio cable 

ENG

21

Operation Manual

MS-300