Акустика Sven MS-106 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
you want - we can
2.1 Multimedia Speaker System
ENG
Fig. 4. Connection diagram
Remote control
a
STANDBY button
b
MUTE button
c
TRE +/–: treble volume control buttons
d
SW +/–: subwoofer volume control buttons
e
VOL +/–: master volume control buttons
Notes:
• If the remote control does not work, please check the
batteries or replace the discharged batteries with new ones.
• Use the remote control at an angle of no more than 30°
within 7 meters from the system.
5. PREPARATION AND OPERATION
Speaker placement
•
Place the satellites symmetrically to the listener at the distance not less
than one meter.
•
Place MSS far away from monitors and TV sets, as insignificant image
distortion in these super-sensitive devices is possible. We recommend that
the subwoofer should be placed on the table.
Installation and operation guide
•
All the components should be switched off before connection.
•
Conect the subwoofer and the satellites (see Fig.4).
•
Plug the mini-jack of thesignalcable (green) into the line output of the sound
card of your PC or MP3 player, and the mini-jack of the microphone cable (pink)
into the microphone input of the sound card.
•
Plug the power cordbinto a mains socket.
•
Switch the power on with ON/OFF switch aon the subwoofer rear panel.
•
Adjust the volume on the remote
control to the necessary level.
•
To improve sound qualit y, use the
sound card Line-Out port.
•
To switch the speaker system on, use
the power switch
a
on the subwoofer
rear panel. The system will be on in
STANDBY mode and the LED display on
the on the front panel will indicate “- -”.
To put the system into operation mode,
press the STANDBY button
a
on the
remote control or one of the volume
control buttons
b
on the subwoofer
front panel. The LED display shows the
volume level (40 by default).
Fig. 3. Remote control
18
TR
E
SW
VOL
Fig. 2. Rear control panel
Mic cable
Input cable
