Sven HT-400 - Инструкция по эксплуатации - Страница 26

you want - we can

ENG

5.1 Active Home Theater

Speaker System

26

Cause

The MSS is not connected to the mains outlet.

Power switch is off.
Volume level is set at minimum value.
Improperly connected audio source. 
Volume level is set at minimum value.

Large amplitude of the input signal.

Solution

Check the connection.

Turn on the switch.
Adjust the volume control knob.
Connect audio sources correctly.
Adjust the volume control knob.

Turn down the source volume and MSS 

volume.

Problem

The MSS doesn’t 

turn on.

No sound.

There is too quiet 

sound of speakers.
Distortion of sound.

If  none  of  the  above  methods  can  solve  the  problem,  please  seek  professional  advice  at  your  nearest  service  center. 

Never attempt to repair the product yourself. 

11. TROUBLESHOOTING

10. HTSS OPERATION

• 

Turn the system on using the POWER switch 

i

 (ON position) on the subwoofer rear panel. The system 

will  turn  on  in  the  mode  playing  the  audio  from  the  DVD  (5.1CH)  input.  The  LED  on  the  front  panel  will  

light  up.  To  switch  to  the  additional  AUX  input,  press  the  AUX  button 

c

  on  the  remote  control.  Adjust  

the volume as desired using the corresponding remote control buttons or side panel knobs: 

• 

MASTER VOLUME (+ / -): master volume control; 

• 

SUB (+ / -): subwoofer volume control; 

• 

When  listening  to  multichannel  signal  using  the  5.1  input,  you  can  adjust  the  center  channel  and  rear 

channels volume independently. 

• 

CEN (+ / -): center channel volume control. 

• 

REAR (+/-): rear channels volume control. 

• 

The RESET button 

b

 returns you to the default settings. 

• 

The 2.1/5.1 mode is used for transmitting a stereo signal using the AUX output, the signal reproduced 

with all the satellite speakers. 

• 

Subwoofer  side  panel  controls:  master  volume  (VOLUME  -/+),  center  channel  volume  (CEN  +/-), 

subwoofer volume (SUB +/-). 

Note. It is recommended that the POWER switch on the subwoofer rear panel be turned off and 

the power cord be unplugged from the mains outlet if the system is left unused for a long period 

of time.