Акустика Sven 250 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
c
: Headphone jack
d
Power LED
a
d
c
b
Active
speaker
Passive
speaker
Fig. 2. Connection diagram
Fig. 1. Control panel
5. PREPARATION AND OPERATION
Speaker placement
•
Place the speakers symmetrically to the listener at a distance of
not less than one meter.
MSS Connecting
Sven 250 speaker system can be connected virtually to any audio
device: DVD/CD, PC sound card, etc. (see Fig. 2 below)
•
Before connecting, make sure that the MSS is unplugged.
•
Connect the signal cable built into the active speaker to output
jack of your PC sound card, MP3 or CD player, etc, see Fig. 2.
Use
mini-jack to 2RCA adapter
(not included) for connection of DVD-player, TV-set etc.
•
Connect the mini-jack of the power adapter cable (included) to the active speaker input socket,
as shown in Fig. 2, and put the power adapter plug into a mains socket.
•
Set volume level to minimum by turning VOL
a
wheel, switch on POWER
b
switch on the active
speaker. Power LED
d
will light up.
•
Adjust the VOL
a
volume control wheel to an approppriate level.
•
Connect your headphones to the headphone jack
c
(see Fig. 1).
Notes:
•
After using the MSS, mind to unplug the power cable of the device from the mains socket.
•
To improve sound quality, use Line-Out output of the sound card.
Control panel
a
VOL: Volume control wheel
b
POWER: Power switch
VOL.
OFF
ON
Power
adapter
Built-in
signal cable
Acoustic
cable
CD
Computer
DVD
Player
ENG
13
Operation Manual
sVEN 250
Mini-jack to 2RCA
adapter
