Акустика SVEN 135 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
ENG
3
User Manual
SVEN 135
2. PACKAGE CONTENTS
•
Speakers — 2 pcs
•
Operation manual — 1 pc
•
Warranty card — 1 pc
3. SAFETY PRECAUTIONS
•
Do not open the MSS and do not perform repairs by yourself. Service and repairs
should be performed only by qualified specialists at authorized service centers. The list of
authorized service centers is on
www.sven.fi
•
Do not allow the circuit of wires (including the grounded ones) between the speakers,
on the power amplifier or the ground, for it causes damage to the power amplifier output
stage.
•
Make sure that foreign objects do not get inside the holes of the MSS.
•
Protect the MSS from high humidity, water and dust.
•
Protect the MSS from heating: do not place it closer than 1 m from a heat source. Do not
expose it to direct sunlight.
•
Do not use any chemical agents for cleaning. Clean it with dry soft cloth only.
•
If the MSS does not operate, unplug it and address your dealer.
4. TECHNICAL DESCRIPTION
Sven 135 USB Multimedia Speaker Systems 2.0 (MSS) is designed to play music and sound
games, movies etc. MSS has built-in bridge amplifier, acoustic and signal cable due to which
it can be connected to virtually any audio source TV, PC, etc. MSS is connected to power
supply via USB-port of a PC, laptop or 5V DC power supply with a cable USB.
MSS special features
•
Power supply via USB-port of a PC, laptop or 5V DC power supply
•
Volume control on the cable
•
Audio sources stereo audio input
•
Plastic speakers cabinets
5. PREPARATION AND OPERATION
Speaker placement
•
Place the speakers symmetrically to the listener at least one meter away.
•
Place MSS far away from monitors and TV sets, as insignificant image distortion in these
super-sensitive devices is possible.
MSS Connecting
•
Before connecting, make sure that MSS is unplugged. Connect signal cable mini-jack 3,5 mm
built-in speaker to audio output of the sound source, for example computer, as shown in
the diagram below.
•
Connect USB-connector to USB-port of PC (laptop or 5V DC power supply) via built-in
USB-cable.
•
Set volume level to minimum by turning VOLUME +/- control wheel on the cable
counterclockwise until it stops.
•
Turn on PC power supply, turn on audio source.
•
Adjust volume level by turning VOLUME +/- control wheel.
Notes:
•
After finishing operation with MSS, mind to turn off the USB-cable from the PC, laptop
USB port or 5V DC power supply.
Характеристики
Остались вопросы?Не нашли свой ответ в руководстве или возникли другие проблемы? Задайте свой вопрос в форме ниже с подробным описанием вашей ситуации, чтобы другие люди и специалисты смогли дать на него ответ. Если вы знаете как решить проблему другого человека, пожалуйста, подскажите ему :)
